Low E glass has been coated in invisible layers of metallic oxide. This coating allows natural light to enter the home while deflecting UV rays and infrared light back out into the environment.

Low E glass can help reduce energy costs by reducing the amount of heat that leaves and enters the home on a summer or winter day. During the summer, low E glass shuts hot air out of the home. During the winter, low E glass keeps warm air in the home to reduce the burden on the furnace.

Laminated glass is made of two pieces of regular or tempered glass sandwiched around a layer of clear plastic film (PVB). The set of glass is treated through a process intended to expel air pockets and then it is heated for an initial round of melting. After this, the glass is heated under pressure to create a finished-bound product. Laminated glass can be made stronger by adding layers, making the end product thicker.  Even if the glass is broken, the PVB layers make the glass layers stick to them so that it does not fall out of the window frame. This glass is commonly used in impact-proof or hurricane proof windows, doors, and other applications where safety from flying debris, tropical storms, and burglars is a concern, as it is less likely to shatter than regular glass.

The standard laminated glass we use for Carribean clients are 5mm+0.76pvb+5mm, 5mm+1.14pvb+5mm. Double laminated insulated glass will also be used for more safety requests.

Insulated double-glazed glass consists of two panes of glass separated by an air or gas-filled space. The panes of glass are typically separated by a gap of around 6-12mm, which is sealed to create an airtight space. The space between the panes is usually filled with air or gas such as argon or krypton, which have low thermal conductivity and are effective at reducing heat transfer. This design helps to reduce heat loss through the window.

Triple glazed glass is similar to insulated double-glazed, but it has an additional pane of glass, which provides even more insulation. This glass is highly effective at reducing heat loss. Moreover, it is often used in conjunction with Low-E (low-emissivity) coatings or other energy-efficient features, making it a popular choice for thermal break aluminum windows in very cold climates.

Reflective glass is annealed or standard glass that has a thin layer of metallic or metallic oxide coating. Since this coating is applied to only one side of the glass, it has a mirror-like appearance.This reflective coating is applied during the float process to enhance the amount of heat reflected by the glass. It can absorb and reflect the sun’s harmful UV and infrared rays yet allow natural visible light to pass through. It also prevents excessive solar glare. However, it does allow natural light to pass through, offering optimal daylighting.